Material Database

Home - Materials - Material Database

Usage Notes

There are more than 2,500 standardized types of steel worldwide, which differ in their composition, manufacturing and post-treatment processes and therefore also in their intended use. Almost 400 of these materials are also produced in our rolling mills. Finding your way around often costs time and nerves.
Our material database should save you time and nerves and make the material search easier.
If you already know the required material, simply use our search function. For example, search for the short name, EN, AISI or UNS. Under Details you will also find the detailed data sheet, which is also available for download.
Further information on using the material database can be found here.

2.4360 - NiCu30Fe - B164 - N04400

Property Value
EN 2.4360
Short Name NiCu30Fe
UNS N04400
Common Designations BS NA13; AFNOR Nu30; Alloy 400
Typical Applications Nickel-copper alloy for offshore technology, shipbuilding, plants in the chemical and petrochemical industry, environmental and waste water technology
Applicable Standards DIN 17744; DIN 17752; ASTM B164; VdTÜV material sheet 263; ASTM B164; ASME SB-164; NACE MR0175
C max. 0,30
Si max. 0,50
Mn max. 2,00
S max. 0,024
Ni min. 63,0
Cu 28,0-34,0
Fe max. 2,5
Analysis Note acc. to ASTM B164
Density [kg/dm³] 8,80
Electrical Resistance at 20°C [Ohm*mm²/m] 0,51
Thermal Conductivity at 20°C [W/m*K] 26,0
Mc Thermal Expansion [10⁻⁶ * K⁻¹] 20-100 °C: 13,9 / 20-400 °C: 16,0 / 20-500 °C: 16,3
Typical Heat Treatment soft annealed
Typical Hardness [HBW] max. 150
Typical Tensile Strength [MPa] min. 450
Category Aerospace
Chemical industry
Datasheet (PDF)