Bar steel - hot forming at the highest level

Home - Products - Bar steel - hot forming
Inquiry

Rolled bars

“Walzwerke Einsal” offers a large selection in the area of hot-rolling. On its fully-automated rolling mill, rectangular and square shapes can be manufactured according to the customer’s wishes - on request also with special tolerances or particular mechanical properties.

In addition to the rolling process, we offer the correct heat treatment and surface finishing, which endow every material with its own characteristics. Short rolling cycles, combined with comprehensive storage of raw materials and low minimum order quantities, these demonstrate a high degree of flexibility. Best possible delivery times and quick reaction to the demands of the market are the result for our customers - the prime basis for a successful and long- term partnership in rolling steel bars.

  • From 14 x 5 up to 160 x 90 mm flat
  • From 14 up to 125 mm square
  • Step-less rolled widths and thicknesses (e.g. 58 x 37.5 mm)
  • rolled bars e.g. acc. to DIN EN 10058 and DIN EN 10059 and international standards e.g. ASTM A484
  • Special tolerances (e.g. half tolerance of a DIN or specification of the range of the tolerance field)
  • Random lengths up to 12 m and fix lengths from 10mm
  • Lot size starts from 500 kg  (smaller quantities on request)
  • Over 400 grades, 35,000 different versions

Dimensions-Graphic


Note

Other dimensions on request

160 x 90mm 160 x 10mm 14 x 5mm 14 x 14mm 125 x 125mm 110 x 110mm 160 x 60mm 160 x 10mm 2 x 2mm 140 120 100 80 60 40 20 20 40 60 80 100 120 140 160

Our broad range of products and processes

In addition to our core competence we offer you wide range of other internal services and processes - this saves you time and money!

Here you will find an overview:

More than 400 different grades

More than 400 different grades

  • Carbon steels
  • high alloyed steels
  • copper alloys
  • composite materials
  • powder metallurgic steels
  • special alloys on request
Hot Working

Hot Working

  • Step-less rolled widths and thicknesses  
  • Hot rolled bars e.g. acc. to DIN EN 10058 and DIN EN 10059 and international standards e.g.  ASTM A484
  • Special tolerances (e.g. half tolerance of a DIN or specification of the range of the tolerance field)
  •  Lot size starts from 500 kg (smaller quantities on request)
  • Thermo-mechanical rolling 
Heat treatment

Heat treatment

  • Solution annealed, quenched and tempered, soft annealed, stabilized, stress relief heat treated, precipitation hardening
  • Heat treatment in compliance with AMS 2750
  • Consistent high quality
  • Special heat treatment with a high degree of variability in temperature  
Straightening process

Straightening process

  • Straightness up to max. 0,50 mm/m
  • Dimensional report including straightness, twist and flatness
  • According to European and International standards 
Cold working

Cold working

  • Comprehensive portfolio of finished products in 1.4301 (Alloy 304/Alloy 304L) in bundles of 250 kg, deliverable in 2 weeks
  • Cut into lengths or in coil
  • Stepless size range
  • Customized profiles according to drawingfrom 4 up to 2,500 mm²
  • Tolerances according to European and International standards
  • Mechanical properties acc. to customer requirements 
  • sizes starts from 500 kg (smaller quantities on request) 
Surface finishing
Varianten | Bearbeitung

Surface finishing

Varianten | Bearbeitung

  • As rolled
  • Shot blasted
  • Pickled
  • As drawn 
  • Grinded acc. to customer requirements
Service
Logistik | Disposition

Service

Logistik | Disposition

  • Comprehensive portfolio of finished products in 1.4301 (Alloy 304/Alloy 304L) in bundles of 250 kg
  • Frame agreements/ long term agreements
  • Logistic /Dispo
  • Subcontracting
  • Inspection test acc. to DIN EN 10204
  • Nondestructive testing (NDT), e.g. ultrasonic-testing
  • Dimensional report including straightness, twist and flatness
  • Application engineering
  • Cutting acc. to customer requirements, e.g. fix length, random lengths, multiple lengths 
Quality assurance

Quality assurance

  • Independent in-house material testing
  • Approvals and Certifications acc. to several standards, e.g. DIN EN 9100
  • Application engineering
  • Cooperation with NADCAP and ISO 17025 certified laboratories