Material Database

Home - Materials - Material Database
Inquiry
Notes on use (click to expand)

Notes on use (click to expand)

There are more than 2,500 standardized types of steel worldwide, which differ in their composition, manufacturing and post-treatment processes and therefore also in their intended use. Almost 400 of these materials are also produced in our rolling mills. Finding your way around often costs time and nerves.
Our material database should save you time and nerves and make the material search easier.
If you already know the required material, simply use our search function. For example, search for the short name, EN, AISI or UNS. Under Details you will also find the detailed data sheet, which is also available for download.
Further information on using the material database can be found here.

request material (please click to expand)

request material (please click to expand)

Have you found the right material, do you have a question about one of our products?

General

  • Short Name
  • AISI
  • UNS
  • Common Designations
  • Typical Applications
  • Applicable Standards

Chemical properties

  • C
  • Si
  • Mn
  • P
  • S
  • Cr
  • Ni
  • Mo
  • V
  • N
  • Cu
  • Al
  • Co
  • Nb
  • W
  • Ti
  • B
  • Fe
  • O
  • H
  • Y
  • Sn
  • Zr

Physical properties

  • Analysis Note
  • Density
  • Electrical Resistance
  • Thermal Conductivity
  • Mc Thermal Expansion
  • Typical Heat Treatment
  • Typical Hardness
  • Typical Tensile Strength

Category

  • Tooling steels
  • Chemical industry
  • Automotive
  • Aerospace
  • Energy technology
  • Defence
  • Medical technology
  • Hydrogen applications
  • Mechanical engineering
EN Short Name AISI UNS Common Designations Typical Applications Applicable Standards C Si Mn P S Cr Ni Mo V N Cu Al Co Nb W Ti B Fe O H Y Sn Zr Analysis Note Category Density [kg/dm³] Electrical Resistance at 20°C [Ohm*mm²/m] Thermal Conductivity at 20°C [W/m*K] Mc Thermal Expansion [10⁻⁶ * K⁻¹] Typical Heat Treatment Typical Hardness [HBW] Typical Tensile Strength [MPa]
Details EN Short Name AISI UNS Common Designations Typical Applications Applicable Standards C Si Mn P S Cr Ni Mo V N Cu Al Co Nb W Ti B Fe O H Y Sn Zr Analysis Note Category Density [kg/dm³] Electrical Resistance at 20°C [Ohm*mm²/m] Thermal Conductivity at 20°C [W/m*K] Mc Thermal Expansion [10⁻⁶ * K⁻¹] Typical Heat Treatment Typical Hardness [HBW] Typical Tensile Strength [MPa]
detail 1.2003 75Cr1 1075 + Cr

Low alloy tool steel 0,70-0,80 0,25-0,50 0,60-0,80 max. 0,030 max. 0,030 0,30-0,40 acc. to SEL Automotive ; Tooling steels ; Mechanical engineering 7,85 soft annealed
detail 1.2067 102Cr6 L3
T61203
PV6C16; PV6 Tool steel / cold work steel for gauges, mandrels, cold pilger rollers and jaws, wood and paper processing tools, pressure rollers, flanging rollers, long and roller shear knives, roller bearings EN ISO 4957; ASTM A681 0,95-1,10 0,15-0,35 0,20-0,40 max. 0,030 max. 0,030 1,35-1,60 max. 0,40 max. 0,10 acc. to EN ISO 4957 Automotive ; Tooling steels 7,85 soft annealed max. 223 ≈ 750
detail 1.2080 X210Cr12 D3
SAE J 438 B
T30403
F5212; Z200C12; X205Cr12KU; SKD1; GOST Ch12; NC11; B.S: BD3; CP10V Tool steel / cold work steel EN ISO 4957; ASTM A681 1,90-2,20 0,10-0,60 0,20-0,60 max. 0,030 max. 0,030 11,00-13,00 acc. to EN ISO 4957 Automotive ; Tooling steels 7,85 16,7 20-500 °C: 12,8 annealed max. 252 ≈ 850
detail 1.2241 50CrV4; 51CrV4; 51CrMnV4 SAE 6150

BS735A51; 735M50; 735H51; AFNOR 50CrV4; 51CV4 Tempered steel for parts in general machine and vehicle construction, such as gear parts, pinions, shafts, gear wheels, etc. EN ISO 683-2; ASTM A29 0,47-0,55 0,10-0,40 0,60-1,00 max. 0,025 max. 0,025 0,80-1,10 0,10-0,25 max. 0,40 acc. to EN ISO 683-2 Automotive ; Tooling steels 7,85 soft annealed max. 225 ≈ 760
detail 1.2311 40CrMnMo7

MCM Tool Steel / Plastic Mold Steel for high strength mold frames, molds and inserts. Die holders and inserts, high-strength machine components, mold plates SE 201; 202 0,35-0,45 0,20-0,40 1,30-1,60 max. 0,035 max. 0,035 1,80-2,10 0,15-0,25 acc. to SEL Tooling steels 7,85 33,5 tempered 290-320 ≈ 1100
detail 1.2312 40CrMnMoS8-6 P20 + S

40 CMD 8.S Tool Steel / Plastic Mold Steel ASTM A681 0,35-0,45 0,30-0,50 1,40-1,60 max. 0,030 0,05-0,10 1,80-2,00 0,15-0,25 acc. to SEL Tooling steels 7,85 0,19 34,5 hardened and tempered 280-325 950-1100
detail 1.2343 X37CrMoV5-1; X38CrMoV5-1 H11
SAE J 438 B
T20811
JIS SKD6 Tool steel / hot work steel EN ISO 4957; SE 201; SE 202; ASTM A681 0,33-0,41 0,80-1,20 0,25-0,50 max. 0,030 max. 0,020 4,80-5,50 1,10-1,50 0,30-0,50 acc. to EN ISO 4957 Tooling steels 7,80 0,52 25,0 annealed max. 234 ≈ 790
detail 1.2344 X40CrMoV5-1 H13
SAE J 438 B
T20813
JIS SKD61 Tool steel / hot work steel EN ISO 4957; ASTM A681 0,35-0,42 0,80-1,20 0,25-0,50 max. 0,030 max. 0,020 4,80-5,50 1,20-1,50 0,85-1,15 acc. to EN ISO 4957 Tooling steels 7,78 0,52 25,0 soft annealed max. 234 ≈ 790
detail 1.2357 50CrMoV13-14 S7
T41907
K320 Tool steel / cold work steel for punching tools, forming tools, scrap shears, punches, countersinking punches, embossing punches, deburring tools, plastic molds and tablet press punches ASTM A681 0,45-0,55 0,20-0,50 0,50-0,80 max. 0,030 max. 0,030 3,00-3,60 1,20-1,60 0,05-0,25 acc. to SEL Tooling steels 7,85 28,9 20-200 °C: 12,2 / 20-400 °C: 12,5 annealed max. 220
detail 1.2360 X48CrMoV8-1-1 A8

Chipper steel Cold work steel for cutting tools, stamping tools, embossing tools, forming tools, press dies, die inserts, extrusion dies, reinforcements, cold extrusion tools, tube tools, cutting tools, billet warm shears, rolling stock shears, shearing knives for sheet metal, industrial knives, wood chipping knives, veneer knives 0,45-0,50 0,70-0,90 0,35-0,45 max. 0,020 max. 0,005 7,30-7,80 1,30-1,50 1,30-1,50 acc. to SEL Tooling steels 7,75 26,1 20-200 °C: 11,6 / 20-400 °C: 11,3 annealed max. 240
detail 1.2363 X100CrMoV5; X100CrMoV5-1 A2
SAE J 438 B
T30102
JIS SKD12 Tool steel / cold work steel EN ISO 4957; ASTM A681 0,95-1,05 0,10-0,40 0,40-0,80 max. 0,030 max. 0,030 4,80-5,50 0,90-1,20 0,15-0,35 acc. to EN ISO 4957 Tooling steels 7,70 0,52 16,0 annealed max. 231 ≈ 780
detail 1.2365 32CrMoV12-28; X32CrMoV3-3 H10
T20810
JIS SKD7 Tool steel / hot work steel EN ISO 4957; ASTM A681 0,28-0,35 0,10-0,40 0,15-0,45 max. 0,030 max. 0,020 2,70-3,20 2,50-3,00 0,40-0,70 acc. to EN ISO 4957 Tooling steels 7,85 0,37 31,4 soft annealed max. 235
detail 1.2379 X153CrMoV12; X155CrVMo12-1 D2
SAE J 438 B
T30402
NC11LV; BS BD2; JIS SKD10; AFNOR Z160CDV12; SS 2210 Tool steel / cold work steel for heavy-duty cutting tools (die and punch); milling cutters, broaches; cutting, punching and cutting tools; Thread rolling and rolling tools; woodworking tools; machine knives; Plastic moulds, measuring instruments, stamping technology tools; Drawing, deep-pressing and impact extrusion tools; pressing tools for the ceramic and pharmaceutical industries; cold rolling for multi-roll stands; Forming and bending tools EN ISO 4957; ASTM A681 1,45-1,60 0,10-0,60 0,20-0,60 max. 0,030 max. 0,030 11,00-13,00 0,70-1,00 0,70-1,00 acc. to EN ISO 4957 Automotive ; Tooling steels 7,70 0,65 20,0 annealed max. 252 ≈ 850
detail 1.2436 X210CrW12 D3
SAE J 438 B
T30403
CPW; BS X210CrW12; JIS SKD2; AFNOR Z210CW12-01; SS 2312 Tool steel / cold work steel EN ISO 4957; ASTM A681 1,90-2,20 0,10-0,60 0,20-0,60 max. 0,030 max. 0,030 11,00-13,00 acc. to EN ISO 4957 Automotive ; Tooling steels 7,70 0,65 20,0 annealed max. 252 ≈ 850
detail 1.2510 100MnCrW4 O1
SAE J 438 B
T31501
NMWV; B.S. B01 Cold work steel for cutting, stamping and cutting tools; threading tools; jigs, templates, guide rails; dies, punches and gauges; woodworking tools; Inserts, sliders, molds for the plastics industry; measuring tools; structural parts; cutting, punching and embossing tools; Machine knives for the metal, wood and paper industries, tools for stamping technology ASTM A681 0,90-1,05 0,15-0,35 1,00-1,20 max. 0,035 max. 0,035 0,50-0,70 0,05-0,15 0,50-0,70 acc. to SEL Automotive ; Aerospace ; Tooling steels ; Defence ; Mechanical engineering 7,85 0,35 30,0 annealed max. 231 ≈ 780
detail 1.2550 60WCrV8 S1

BS 60WCrV8; AFNOR 60WCrV8; GOST 6ChW2S; UNE F.5242 Tool steel / cold work steel for cold shears, paper and wood choppers, deburring cuts, cutting tools for sheet metal thicknesses up to approx. 10 mm, punches, ejectors, pneumatic chisels EN ISO 4957; ASTM A681 0,55-0,65 0,70-1,00 0,15-0,45 max. 0,030 max. 0,030 0,90-1,20 0,10-0,20 acc. to EN ISO 4957 Tooling steels ; Defence 8,00 0,30 25,0 annealed max. 230
detail 1.2714 55NiCrMoV7; 56NiCrMoV7 L6
SAE J 438 B
T61206
JIS SKT4 Tool steel / hot work steel EN ISO 4957; ASTM A681 0,50-0,60 0,10-0,40 0,60-0,90 max. 0,030 max. 0,030 0,80-1,20 1,50-1,80 0,35-0,55 0,05-0,15 acc. to EN ISO 4957 Tooling steels ; Defence 7,80 36,0 hardened and tempered max. 252 ≈ 850
detail 1.2721 50NiCr13

K605; STN 19614; NC50E Tool steel / cold work steel for cold stamping tools, cutlery punches, countersinking stamps, reinforcements, tools in jig construction 0,45-0,55 0,15-0,35 0,40-0,60 max. 0,035 max. 0,035 0,90-1,20 3,00-3,50 acc. to SEL Tooling steels 7,85 36,0 soft annealed max. 248 ≈ 840
detail 1.2764 X19NiCrMo4

ES 106 KM130; M130; STN 16720; ECN4M Case-hardening steel for pressing tools, highly stressed plastic moulds, profile rollers 0,16-0,22 0,10-0,40 0,15-0,45 max. 0,030 max. 0,030 1,10-1,40 3,80-4,30 0,15-0,25 acc. to SEL Automotive 7,85 32,9 20-100 °C: 11,5 / 20-400 °C: 12,8 soft annealed max. 250
detail 1.2767 45NiCrMo16; X45NiCrMo4

ES 275 KK600; TC-767; VNC4 Tool steel / cold work steel for injection molding tools with high compressive stress and / or abrasive surface stress, pressing tools, profile rollers EN ISO 4957 0,40-0,50 0,10-0,40 0,20-0,50 max. 0,030 max. 0,030 1,20-1,50 0,15-0,35 3,80-4,30 acc. to EN ISO 4957 Automotive ; Tooling steels 7,85 0,30 28,0 soft annealed max. 260 ≈ 870
detail 1.2826 60MnSiCr4 S4

K722; MS Tool steel / cold work steel for collets, clamping jaws and cartridges, deburring cuts, ejectors, press plates, cold bending tools ASTM A681 0,58-0,65 0,80-1,00 0,80-1,20 max. 0,030 max. 0,030 0,20-0,40 acc. to SEL Automotive ; Tooling steels 7,85 34,0 20-100 °C: 12,1 / 20-200 °C: 12,8 / 20-300 °C: 13,3 annealed ≈ 750
detail 1.2842 90MnCrV8 O2
SAE J 438 B
T31502
NMV; BS. BO2; AFNOR 90MV8 Tool steel / cold work steel EN ISO 4957; ASTM A681 0,85-0,95 0,10-0,40 1,80-2,20 max. 0,030 max. 0,030 0,20-0,50 acc. to EN ISO 4957 Tooling steels 7,85 0,35 30,0 soft annealed max. 220 ≈ 740
detail 1.3505 100Cr6 A295
E52100
G52985
G52986
R100; JIS SUJ2; GB; T GCr15 Bearing steel EN ISO 683-17; ASTM A295; JIS G4805; ASTM A646; ASTM A711; ASTM A752 0,93-1,05 0,15-0,35 0,25-0,45 max. 0,025 max. 0,015 1,35-1,60 max. 0,10 max. 0,30 max. 0,050 acc. to EN ISO 683-17 Automotive ; Aerospace ; Tooling steels ; Defence 7,80 0,19 33,0 20-100 °C: 11,5 / 20-400 °C: 13,9 annealed max. 266 ≈ 900
detail 1.3401 X120Mn12 A
B2
B3
B4
C

K700; Hadfield Steel; hard manganese steel; STN 17618 Austenitic hard manganese steel for blasting plant construction, security technology (doors, cladding), safe construction, wear-resistant components for crushing plants, crushing jaws, bulk material transport, processing and process engineering, centrifuges, magnet construction ASTM A128 1,10-1,30 0,30-0,50 12,00-13,00 max. 0,100 max. 0,040 max. 1,50 acc. to SEL Tooling steels ; Energy technology ; Defence 7,90 0,68 13,0 solution annealed max. 200 800 - 1100
detail 1.3813 X40MnCrN19

Non-magnetic steel for mechanical and thermally stressed components 0,30-0,50 max. 0,80 17,00-19,00 max. 0,100 max. 0,030 3,00-5,00 0,08-0,12 acc. to SEL Tooling steels ; Energy technology 7,85 quenched 740-930
detail 1.5415 16Mo3 F1
P12
T12
P11
T11
K11820
K12020
K12320
K12822
K11562
K11597
16Mo3KG; 16Mo3KW; 16Mo5KG; 16Mo5KW; JIS STBA12; JIS STFA12; JIS STPA12; AFNOR 16Mo3 Heat-resistant structural steel for boiler construction, superheating tubes, superheated steam lines and headers, heat exchangers and purposes in the petroleum processing industry EN 10028-2; ASTM A182 0,12-0,20 max. 0,35 0,40-0,90 max. 0,025 max. 0,010 max. 0,30 max.0,30 0,25-0,35 max. 0,012 max. 0,30 acc. to EN 10028-2 Chemical industry ; Energy technology 7,85 0,20 48,5 20-500 °C: 13,9 annealed 130-170 440-590
detail 1.5530 20MnB5

Precidur HLB 20 Boron-alloyed heat-treatable steel for mechanical and plant engineering EN ISO 683-2 0,17-0,23 max. 0,40 1,10-1,40 max. 0,025 max. 0,035 max 0,40 0,0008-0,0050 acc. to EN ISO 683-2 Chemical industry ; Energy technology 7,85
detail 1.5752 15NiCr13; 14NiCr14 3310
G33106
BS 970; 655M13; 12HN3A Case-hardening steel for plastic mold construction, mechanical engineering, vehicle construction (particularly automobile construction), aircraft construction and gear construction; highly stressed components, e.g. Piston rods, connecting rods, gears (e.g. gears, bevel gears, pinion gears and ring gears), shafts (e.g. pinion shafts, countershafts and propshafts), journals, bolts and cardan joints EN ISO 683-3; EN 10277-4 0,12-0,18 0,15-0,40 0,35-0,65 max. 0,025 max. 0,035 0,60-0,90 3,00-3,50 max. 0,40 acc. to EN ISO 683-3 Automotive ; Aerospace ; Tooling steels ; Chemical industry 7,85 34,0 20-100 °C: 11,1 / 20-400 °C: 13,5 soft annealed max. 230 ≈ 780
detail 1.5918 17CrNi6-6 3115

AFNOR 16NC6 Case-hardening steel for automotive and transmission construction, such as drive bevel gears, pinions, ring gears, gears, shafts, bolts and countershafts EN ISO 683-3; EN 10263-3 0,14-0,20 00,15-0,40 0,50-0,90 max. 0,025 max. 0,035 1,40-1,70 1,40-1,70 max. 0,40 acc. to EN ISO 683-3 Automotive 7,77 0,12 40,5 20-100 °C: 11,5 / 20-400 °C:13,9 ≈ 780
detail 1.5919 15CrNi6 3115
4320

Case-hardening steel for automotive and transmission construction, such as drive bevel gears, pinions, ring gears, gears, shafts, bolts and countershafts ASTM A29; ASTM A752; EN 10084 0,14-0,19 max. 0,40 0,40-0,60 max. 0,035 max. 0,035 1,40-1,70 1,40-1,70 acc. to SEL Automotive 7,77 max. 181 ≈ 610
detail 1.5920 18CrNi8

Case-hardening steel for automotive and transmission construction, such as drive bevel gears, pinions, ring gears, gears, shafts, bolts and countershafts EN 10084 0,15-0,20 0,15-0,40 0,40-0,61 max. 0,035 max. 0,035 1,80-2,10 1,80-2,10 acc. to SEL Automotive 7,78 0,12 39,0 20-100 °C: 11,5 / 20-400 °C: 13,9
detail 1.6563 41NiCrMo7-3-2 4340
N08535
SNCM439; JIS G4053 Tempering steel for plastic molds, quality control parts (turbine shafts, helicopter rotor shafts, blades, transmission parts, crankshaft fasteners, gears) ASTM A29; EN 10263-4; EN 10269 0,38-0,44 max. 0,30 0,60-0,90 max. 0,025 max. 0,025 0,70-0,90 1,65-2,00 0,15-0,30 max. 0,25 acc. to EN 10263-4 Automotive ; Tooling steels ; Chemical industry 7,85 max. 217 ≈ 745
detail 1.6580 30CrNiMo8 4340
G43400
BS 823M30; AFNOR 30NCD8 Tempered steel for automotive and mechanical engineering, e.g. holders for test machines, for pole end plates for generators, steering column arms for airport tractors, for coils in press construction and suspensions for rolling mill machines EN ISO 683-2; EN 10250-3; EN 10269 0,26-0,34 0,10-0,40 0,50-0,80 max. 0,025 max. 0,035 1,80-2,20 1,80-2,20 0,30-0,50 max. 0,40 acc. to EN ISO 683-2 Automotive 7,76 0,19 38,0 20-100 °C: 11,5 / 20-400 °C: 13,9 max. 247 ≈ 835
detail 1.6582 34CrNiMo6 4340
L 43
G43400
SS2541; AFNOR 35NCD6; BS970 817M40T; 34HNM Tempered steel for automobile and engine construction EN ISO 683-2; EN 10250-3; EN 10263-4; EN 10269; EN 10277; ASTM A29; ASTM A320; ASTM A322; ASTM A646; ASTM A752 0,30-0,38 0,10-0,40 0,50-0,80 max. 0,025 max. 0,035 1,30-1,70 1,30-1,70 0,15-0,30 max. 0,40 acc. to EN ISO 683-2 Automotive 7,80 33,7 20-100 °C: 12,1 / 20-400 °C: 13,6 hardened and tempered 800-1400
detail 1.6587 18CrNiMo7-6 4820

BS EN355; BS 822A17; BS 822H17; BS 817M17; 17HNM Tempering steel / case-hardening steel for highly stressed gears, such as ring gears, drive pinions, gear wheels EN ISO 683-17 0,15-0,21 max. 0,40 0,50-0,90 max. 0,025 max. 0,015 1,50-1,80 1,40-1,70 0,25-0,35 max. 0,30 max. 0,050 acc. to EN ISO 683-17 Automotive 7,80 0,12 39,8 20-100 °C: 11,5 / 20-400 °C: 13,9 annealed max. 229 ≈ 770
detail 1.6758 23MnNiMoCr5-4

Tempered steel / chain steel for mechanical engineering, automotive accessories industry and mining, such as chains DIN 17115 0,20-0,26 max. 0,25 1,10-1,40 max. 0,020 max. 0,015 0,40-0,60 0,90-1,10 0,50-0,60 max. 0,012 max. 0,20 0,025-0,050 acc. to DIN 17115 Automotive 7,80 0,19 41,5 20-100 °C: 11,5 / 20-400 °C: 13,9
detail 1.7131 16MnCr5 5115

527M17; 590H17; 590M17; 16MC4; 2173; F.1516; F.1517; 18ChG Case-hardening steel / cold work steel for e.g. Hole locking systems, transmission parts, gear wheels, joint parts, shafts, gudgeon pins, camshafts, bolts, journals, cardan joints, mold plates for plastics processing, synthetic resin moulds EN 10132-2; EN 10263-3; EN 10297-1; ASTM A29; ASTM A711; EN 10269 0,14-0,19 max. 0,40 1,00-1,30 max. 0,035 max. 0,035 0,80-1,10 acc. to EN 10132-2 Automotive ; Tooling steels ; Chemical industry 7,81 0,12 41,0 20-100 °C: 11,5 / 20-400 °C: 13,9 annealed max. 207 ≈ 700
detail 1.7139 16MnCrS5 5115

527M17; 590H17; 590M17; 16MC4; 2173; F.1516; F.1517; 18ChG Case-hardening steel for mechanical engineering, such as gear parts EN ISO 683-3; EN 10263-3; EN 10277; EN 10297-1 0,14-0,19 0,15-0,40 1,00-1,30 max. 0,025 0,020-0,040 0,80-1,10 max. 0,40 acc. to EN ISO 683-3 Automotive 7,80
detail 1.7147 20MnCr5 4820
5120
5120 H
G48200
G51200
H51200
AFNOR 20MC5; 20HG Case-hardening steel for e.g. for bushes, gudgeon pins, spindles, camshafts, gear wheels, shafts, pinions, control parts and gear parts EN ISO 683-3 0,17-0,22 0,15-0,40 1,10-1,40 max. 0,025 max. 0,035 1,00-1,30 max. 0,40 acc. to EN ISO 683-3 Automotive 7,75 0,12 42,0 20-100 °C: 11,5 / 20-400 °C: 13,9 annealed max. 217 ≈ 730
detail 1.7149 20MnCrS5 5120H

AFNOR 20MC5; 20HG Case-hardened steel for mechanical engineering, such as gear parts, gear wheels, construction elements EN ISO 683-3; EN 10263-3; EN 10277 0,17-0,22 0,15-0,40 1,10-1,40 max. 0,025 0,020-0,040 1,00-1,30 max. 0,40 acc. to EN ISO 683-3 Automotive 7,75 0,12 42,0 20-100 °C: 11,5 / 20-400 °C: 13,9
detail 1.7218 25CrMo4 4130H
4130 RH
H41300
SS7218; AFNOR 25 CD4; BS970 708A25; 708M25; 25HM Tempered steel for automotive construction, such as screws and safety parts EN ISO 683-2; EN 10132-3; EN 10250-3; EN 10263-4; EN 10269; EN 10305-1; EN 10277 0,22-0,29 0,10-0,40 0,60-0,90 max. 0,025 max. 0,035 0,90-1,20 0,15-0,30 max. 0,40 acc. to EN ISO 683-2 Automotive ; Aerospace ; Energy technology 7,75 0,19 49,0 hardened and tempered max. 240 ≈ 810
detail 1.7225 42CrMo4 4140
4140 H
4140 RH
4142
4142 H
4145
G41400
G41420
G41450
H41400
H41420
K14248
SS2244; UNE F.1252; F.1257; M4S Tempered steel for automotive and aircraft construction, such as turbine parts, axles, steering knuckles EN ISO 683-2; EN 10132-3; EN 10250-3; EN 10263-4; EN 10269; EN 10297-1; EN 10305-1; ASTM A29; ASTM A304; ASTM A752; EN 10269; EN 10277 0,38-0,45 0,10-0,40 0,60-0,90 max. 0,025 max. 0,035 0,90-1,20 0,15-0,30 max. 0,40 acc. to EN ISO 683-2 Automotive ; Aerospace ; Defence ; Hydrogen applications 7,75 45,1 20-100 °C: 12,1 / 20-400 °C: 13,6 soft annealed max. 217 ≈ 720
detail 1.7227 42CrMoS4 4140
4140 H
4140 RH
4142
4142 H
4145
G41400
G41420
G41450
H41400
H41420
K14248
SS2244; UNE F.1252; F.1257; M4S Tempered steel for automotive and aircraft construction, such as axles, shafts, gears, tires, rods, crankshafts, screws, connecting and push rods EN ISO 683-2; EN 10263-4; EN 10277; ASTM A29; ASTM A752 0,38-0,45 0,10-0,40 0,60-0,90 max. 0,025 0,020-0,040 0,90-1,20 0,15-0,30 max. 0,40 acc. to EN ISO 683-2 Automotive ; Aerospace ; Energy technology 7,75 42,6 20-100 °C: 12,1 / 20-400 °C: 13,6 hardened and tempered 800-1300
detail 1.8159 51CrV4 6145
6150
6150 H
Class D
G65100
H61500
NCV; BS 970 735A50; 735A51; 50HF; SS2230 Tempered steel for machine, vehicle and gear construction, such as gear parts, pinions, shafts and gear wheels EN ISO 683-2; EN 10089; EN 10132-4; EN 10250-3; EN 10277; ASTM A355 0,47-0,55 0,10-0,40 0,60-1,00 max. 0,025 max. 0,025 0,80-1,10 0,10-0,25 max. 0,40 acc. to EN ISO 683-2 Automotive ; Aerospace ; Energy technology 7,70 0,19 42,6 hardened max. 310 ≈ 1045
detail 1.3912 Ni 36 Alloy 36
K93600
Invar 36; Pernifer 36; NILO 36; SG 5 Low thermal expansion nickel-iron alloy SEW 385 max. 0,05 max. 0,30 max. 0,50 35,00-37,00 acc. to SEL Aerospace ; Chemical industry ; Energy technology ; Defence ; Medical technology 8,10 0,08 12,8 20-100 °C: 1,4 / 20-400 °C 8,4 / 20-500 °C: 9,7 soft annealed max. 146 ≈ 490
detail 1.3974 X2CrNiMnMoNNb23-17-6-3 F49
S33228
Submarine steel Non-magnetic special steel for shipbuilding, electrical engineering and mechanical engineering SEW 390 max. 0,03 max. 1,00 4,50-6,50 max. 0,025 max. 0,010 21,00-24,50 15,50-18,00 2,80-3,40 0,30-0,50 0,10-0,30 acc. to SEL Aerospace ; Chemical industry ; Defence ; Medical technology ; Hydrogen applications 7,90 0,70 13,5 20-100 °C: 15,5 / 20-400 °C: 17,3 solution annealed max. 341 800-1050
detail 1.3964 X2CrNiMnMoNNb21-16-5-3 XM-19 (similiar)
S20910 (similiar)
Submarine steel; AFNOR S 20910; Alloy 50; P501 Non-magnetic special steel for shipbuilding, electrical engineering and mechanical engineering VG 81237; SEW390 max. 0,03 max. 1,00 4,00-6,00 max. 0,025 max. 0,010 20,00-21,50 15,00-17,00 3,00-3,50 0,20-0,35 max. 0,25 acc. to SEL Aerospace ; Chemical industry ; Defence ; Medical technology ; Hydrogen applications 7,90 0,81 14,0 20-100 °C: 15,7 / 20-400 °C: 17,8 hardened and tempered max. 279 700-950
detail 1.4003 X2CrNi12 3Cr12
S40977
BS; AFNOR; SS; UNSE X2CrNi12 Corrosion-resistant ferritic steel for apparatus and container construction, container construction, agricultural technology, materials handling technology, environmental technology, construction industry, automotive and mechanical engineering EN 10088-3; EN 10272 max. 0,03 max. 1,00 max. 1,50 max. 0,040 max. 0,030 10,5-12,5 0,30-1,00 max. 0,030 acc. to EN 10088-3 Automotive ; Aerospace ; Chemical industry ; Hydrogen applications 7,70 0,60 25,0 20-100 °C: 10,4 / 20-400 °C: 11,6 / 20-500 °C: 11,9 annealed max. 200 450-600
detail 1.4005 X12CrS13 416
S41600
BS 416S21; JIS SUS416; Z11CF13; SIS2380 Corrosion-resistant martensitic steel with targeted S addition for improved machinability. Application in the automotive industry, chemicals, petrochemicals, power engineering, mechanical and plant engineering and for fasteners, EN 10088-3; ASTM A585; ASME SA585 0,06-0,15 max. 1,00 max. 1,50 max. 0,040 0,15-0,35 12,0-14,0 max. 0,60 acc. to EN 10088-3 Automotive ; Chemical industry ; Energy technology ; Hydrogen applications 7,70 0,60 30,0 20-100 °C: 10,5 / 20-300 °C: 12,0 hardened and tempered max. 210 650-850
detail 1.4006 X12Cr13 410
S41000
BS 410S21; AFNOR Z10C13; SS 2302; AFNOR Z13C13; UNI X12Cr13; GOST 12Ch13 Corrosion-resistant martensitic steel for mechanical engineering, petroleum and petrochemical industries EN 10088-3; ASTM A276; ASTM A479; ASTM F899; ASME SA276; ASME SA479 0,08-0,15 max. 1,00 max. 1,50 max. 0,040 max. 0,030 11,5-13,5 max. 0,75 acc. to EN 10088-3 Tooling steels ; Chemical industry ; Energy technology ; Defence ; Medical technology ; Hydrogen applications 7,70 0,60 30,0 20-100 °C: 10,5 / 20-400 °C: 12,0 hardened and tempered max. 210 650-850
detail 1.4016 X6Cr17 430
S43000
BS 430S17; AFNOR Z8C17; SIS 2320 Corrosion-resistant ferritic steel for the construction industry, decorative purposes, electronic equipment, food industry and machine building EN 10088-3; ASTM A276; ASTM A479; ASTM F899; ASME SA276; ASME SA479 max. 0,08 max. 1,00 max. 1,00 max. 0,040 max. 0,030 16,0-18,0 acc. to EN 10088-3 Automotive ; Chemical industry ; Energy technology ; Hydrogen applications 7,70 0,60 25,0 20-100 °C: 10,0 / 20-400 °C: 10,5 / 20-500 °C: 11 annealed max. 200 400-630
detail 1.4021 X20Cr13 420
420A
S42000
BS 420S37; AFNOR Z20Cr13; UNI X20Cr13; SS 2303; JIS SUS420J1; GOST 20Ch13; GB 2Cr13 Corrosion-resistant martensitic steel for mechanical engineering, the automotive industry, energy technology, medical technology and the food industry EN 10088-3; ASTM A276; ASTM F899; ASME SA276; EN ISO 7153-1 0,16-0,25 max. 1,00 max. 1,50 max. 0,040 max. 0,030 12,0-14,0 acc. to EN 10088-3 Automotive ; Tooling steels ; Chemical industry ; Energy technology ; Medical technology ; Hydrogen applications 7,70 0,60 30,0 20-100 °C: 10,5 / 20-400 °C: 12,0 hardened and tempered max. 241 700-850
detail 1.4028 X30Cr13 420
420B
S42020
BS 420S45; AFNOR Z33C13; JIS SUS420J2; SS 2304; GOST 30Ch13; UNE F.3403 Corrosion-resistant martensitic steel for mechanical engineering, the automotive industry, energy technology, medical technology and the food industry EN 10088-3; ASTM A276; ASTM F899; ASME SA276; EN ISO 7153-1 0,26-0,35 max. 1,00 max. 1,50 max. 0,040 max. 0,030 12,0-14,0 acc. to EN 10088-3 Automotive ; Tooling steels ; Chemical industry ; Energy technology ; Medical technology ; Hydrogen applications 7,70 0,65 30,0 20-100 °C: 10,5 / 20-400 °C: 12,0 soft annealed max. 245 max. 800
detail 1.4034 X46Cr13 420
420C
S42000
BS X46Cr13; AFNOR X46Cr13; AFNOR Z44C14; JIS SUS420; GOST 40Ch13; UNE F.3405 Corrosion-resistant martensitic steel for mechanical engineering, medical technology, the automotive industry, energy technology, the cutlery industry, for fasteners and architecture EN 10088-3; ASTM A276; ASTM F899; ASME SA276; EN ISO 7153-1 0,43-0,50 max. 1,00 max. 1,00 max. 0,040 max. 0,030 12,5-14,5 acc. to EN 10088-3 Automotive ; Tooling steels ; Chemical industry ; Energy technology ; Medical technology ; Hydrogen applications 7,70 0,55 30,0 20-100 °C: 10,5 / 20-400 °C: 12,0 hardened and tempered 850-1000
detail 1.4037 X65Cr13 420
420F
S42020
Corrosion-resistant martensitic steel for mechanical engineering, medical technology, the cutlery industry, for ball bearings and the tool industry EN ISO 7153-1; ASTM F899; SEW 400 0,58-0,70 max. 1,00 max. 1,00 max. 0,040 max. 0,15 12,50-14,50 acc. to SEL Automotive ; Tooling steels ; Chemical industry ; Energy technology ; Medical technology ; Hydrogen applications 7,70 0,55 30,0 20-100 °C: 10,5 / 20-400 °C: 12,0 soft annealed max. 245 max. 850
detail 1.4057 X17CrNi16-2 431
S43100
BS431S29; AFNOR Z15CN16-02; JIS SUS431; SS 2321; UNE F.3427; GOST 20Ch17N2 Corrosion-resistant martensitic steel for the automotive industry, turbine and power plant construction, onshore and offshore energy technology, the aviation industry, mechanical engineering, the food industry and petrochemistry EN 10088-3; ASTM A276; ASME SA276; ASTM A479; ASME SA479; ASTM F899; EN ISO 7153-1 0,12-0,22 max. 1,00 max. 1,50 max. 0,040 max. 0,030 15,0-17,0 1,50-2,50 acc. to EN 10088-3 Automotive ; Tooling steels ; Chemical industry ; Energy technology ; Medical technology ; Hydrogen applications 7,00 0,70 25,0 20-100 °C: 10,0 / 20-400 °C: 10,5 hardened and tempered 800-950
detail 1.4104 X14CrMoS17 430F
S43020
BS X14CrMoS17; AFNOR Z13CF17; JIS SUS430F; SS 2383; UNE F.3413 Corrosion-resistant martensitic steel with very good machinability for the automotive industry, electronic equipment, power engineering, mechanical engineering, fasteners and architecture EN 10088-3; ASTM A582; ASME SA582; ASTM F899; EN ISO 7153-1 0,10-0,17 max. 1,00 max. 1,50 max. 0,040 0,15-0,35 15,5-17,5 0,20-0,60 acc. to EN 10088-3 Automotive ; Energy technology ; Medical technology ; Hydrogen applications 7,70 0,70 25,0 20-100 °C: 10,0 / 20-400 °C: 10,5 hardened and tempered 650-850
detail 1.4111 X110CrMoV15

RfSH 1 Corrosion-resistant martensitic steel for stainless ball bearings, wear parts of canning machines, spray nozzles, valves and plastic molds 1,05-1,15 max. 1,00 max. 1,00 max. 0,045 max. 0,030 14,0-16,0 0,40-0,60 0,10-0,15 acc. to SEL Automotive ; Tooling steels 7,70 0,65 29,0 20-100 °C: 10,5 / 20-400 °C: 11,5 / 20-500 °C: 12,0 annealed max. 265 ≈ 900
detail 1.4112 X90CrMoV18 440B
S44003
BS X90CrMoV18; AFNOR X89CrMoV18-1; JIS SUS440B Corrosion-resistant martensitic steel for knives, surgical cutting tools, mold inserts and active elements in plastics processing and also for chemically aggressive molding compounds EN 10088-3; ASTM A276; ASME SA276; ASTM F899; EN ISO 7153-1 0,85-0,95 max. 1,00 max. 1,00 max. 0,040 max. 0,030 17,0-19,0 0,90-1,30 0,07-0,12 acc. to EN 10088-3 Automotive ; Tooling steels ; Energy technology ; Medical technology 7,70 0,80 15,9 20-100 °C: 10,3 / 20-400 °C: 11,6 soft annealed max. 265 max. 900
detail 1.4116 X50CrMoV15

Corrosion-resistant martensitic steel for knives EN 10088-3; NF S 94-090 0,45-0,55 max. 1,00 max. 1,00 max. 1,50 max. 0,030 14,0-15,0 0,50-0,80 0,10-0,20 max. 0,15 acc. to EN 10088-3 Tooling steels ; Medical technology 7,70 0,55 30,0 20-100 °C: 10,5 / 20-400 °C: 11,5 / 20-500 °C: 12,0 annealed max. 280 max. 900
detail 1.4122 X39CrMo17-1

HC17M Corrosion resistant martensitic steel for shafts, spindles, pins, pistons, valves, fittings, knives and shipbuilding EN 10088-3 0,33-0,45 max. 1,00 max. 1,50 max. 0,040 max. 0,030 15,5-17,5 max. 1,00 0,80-1,30 acc. to EN 10088-3 Automotive ; Tooling steels ; Medical technology 7,70 0,65 29,0 20-100 °C: 10,3 / 20-400 °C: 11,6 hardened and tempered max. 280 750-950
detail 1.4125 X105CrMo17 440C
S44004
AFNOR Z100CD17; JUS SUS440C; GB 108Cr17; GOST 95Ch18; N695 Corrosion-resistant martensitic steel for knives in the food industry EN 10088-3; ASTM A276; ASME SA276; ASTM F899; EN ISO 7153-1 0,95-1,20 max. 1,00 max. 1,00 max. 0,040 max. 0,030 16,0-18,0 0,40-0,80 acc. to EN 10088-3 Aerospace ; Chemical industry ; Medical technology 7,70 0,70 15,5 20-100 °C: 10,4 / 20-400 °C: 11,6 annealed max. 285 max. 950
detail 1.4162 X2CrMnNiN22-5-2 F69
S32101
LDX 2101 Corrosion-resistant lean duplex steel for the chemical, pulp and paper, oil and gas, tank and construction industries EN 10088-3; ASTM A276; ASME SA276; ASTM A479; ASME SA479; ASTM A182; ASME SA182; NACE MR0175; ISO 15156-3; PED 97/23/EC; EN 10272; AD2000 W2 + W10 acc. to EN 10088-3 Aerospace ; Chemical industry ; Energy technology ; Hydrogen applications 7,70 0,80 15,0 solution annealed max. 290 min. 650
detail 1.4301 X5CrNi18-10 304
S30400
BS304S31; AFNOR Z7CN18-09; JIS SUS304; SS 1333; GOST 08Cr18N10; UNE F.3504 Corrosion-resistant austenitic steel for the construction industry, chemical industry, automotive industry, food industry, container construction, decorative purposes and kitchen equipment, petroleum and petrochemical industry and electronic equipment EN 10088-3; EN 10269; ASTM A276; ASME SA276; ASTM A479; ASME SA479; AMS QQS 763; AMS 5639; ASTM A182; ASME SA182; NACE MR0175; ISO 15156-3; PED 97/23/EC; EN 10272; AD2000 W2 + W10; DIN EN 10269 max. 0,07 max. 1,00 max. 2,00 max. 0,045 max. 0,030 17,5-19,5 8,0-10,5 max. 0,10 acc. to EN 10088-3 Automotive ; Aerospace ; Chemical industry ; Energy technology ; Medical technology ; Hydrogen applications 7,90 0,73 15,0 20-100 °C: 16,0 / 20-400 °C: 17,5 / 20-500 °C: 18,0 solution annealed max. 215 500-700
detail 1.4303 X5CrNi18-12 305
308
S30500
BS415S19; AFNOR Z5CN18-11FF; JIS SUS305; SSX4CrNi18-12; GOST 06Ch18N11; UNE F.3513 Corrosion-resistant austenitic steel for the construction industry, electrical industry, automotive industry and the food industry EN 10088-3; EN 10269; EN 10269; ASTM A276; ASME SA276 max. 0,06 max. 1,00 max. 2,00 max. 0,045 max. 0,030 17,0-19,0 11,0-13,0 max. 0,10 acc. to EN 10088-3 Automotive ; Chemical industry ; Energy technology 7,90 0,73 15,0 20-100 °C: 16,0 / 20-400 °C: 17,5 / 20-500 °C: 18,0 solution annealed max. 215 500-700
detail 1.4305 X8CrNiS18-9 303
S30300
BS 303S31; AFNOR Z8CNF18-09; JIS SUS303; SS 2346; UNE F.310.C Corrosion-resistant austenitic steel with added sulfur for machining in the automotive, food, mechanical engineering, petrochemical, instrument and electronic equipment industries EN 10088-3; ASTM A582; ASME SA582; ASTM F899; EN ISO 7153-1 max. 0,10 max. 1,00 max. 2,00 max. 0,045 0,15-0,35 17,0-19,0 8,0-10,0 max. 0,10 max. 1,00 acc. to EN 10088-3 Automotive ; Chemical industry ; Medical technology 7,90 0,73 15,0 20-100 °C: 16,0 / 20-400 °C: 17,5 / 20-500 °C: 18,0 solution annealed max. 230 500-750
detail 1.4306 X2CrNi19-11 304L
S30403
BS 304S11; AFNOR Z3CN19-11; JIS SUS304L; SS 2352; UNE F.3503 Corrosion-resistant austenitic steel for the construction industry, chemical industry, automotive industry, food industry, container construction, decorative purposes and kitchen equipment, petroleum and petrochemical industry and electronic equipment EN 10088-3; ASTM A276; ASME SA276; ASTM A479; ASME SA479; ASTM A182; ASME SA182; NACE MR0175; ISO 15156-3; PED 97/23/EC; EN 10272; AD2000 W2 + W10 max. 0,030 max. 1,00 max. 2,00 max. 0,045 max. 0,030 18,0-20,0 10,0-12,0 max. 0,10 acc. to EN 10088-3 Automotive ; Chemical industry 7,90 0,73 15,0 20-100 °C: 16,0 / 20-400 °C: 17,5 / 20-500 °C: 18,0 solution annealed max. 215 460-680
detail 1.4307 X2CrNi18-9 304L
S30403
BS X2CrNi18-9; AFNOR Z3CN19-09; JIS SUS304L; SS 2352; UNE X2CrNi18-9 Corrosion-resistant austenitic steel for the construction industry, chemical industry, automotive industry, food industry, container construction, decorative purposes and kitchen equipment, petroleum and petrochemical industry and electronic equipment EN 10088-3; EN 10269; EN 10269; ASTM A276; ASME SA276; ASTM A479; ASME SA479; ASTM A182; ASME SA182; AMS QQS 763; AMS 5647; NACE MR0175; ISO 15156-3; PED 97/23/EC; EN 10272; AD2000 W2 + W10 max. 0,030 max. 1,00 max. 2,00 max. 0,045 max. 0,030 17,5-19,5 8,0-10,5 max. 0,10 acc. to EN 10088-3 Automotive ; Aerospace ; Chemical industry ; Energy technology ; Medical technology ; Hydrogen applications 7,90 0,73 15,0 20-100 °C: 16,0 / 20-400 °C: 18,0 / 20-500 °C: 18,0 solution annealed max. 215 500-700
detail 1.4310 X10CrNi18-8 301
S30200
BS 301S21; AFNOR Z11CN18-08; GOST 12Ch18N9; JIS SUS301; SS 2331; UNE F.3517 Corrosion resistant austenitic steel with good formability for corrosion resistant spring components EN 10088-3; ASTM F899; ISO 7153-1 0,05-0,15 max. 2,00 max. 2,00 max. 0,045 max. 0,15 16,0-19,0 6,0-9,5 max. 0,80 max. 0,10 acc. to EN 10088-3 Automotive ; Chemical industry ; Medical technology 7,90 0,73 15,0 20-100 °C: 16,0 / 20-300 °C: 17,0 / 20-500 °C: 18,0 solution annealed max. 230 500-750
detail 1.4313 X3CrNiMo13-4 415
F6NM
S41500
BS X3CrNiMo13-4; AFNOR; Z6CN13-04; SS 2384; UNE X3CrNiMo13-4 Corrosion-resistant martensitic steel for the high-pressure range and therefore very well suited for use in turbine and power plant construction EN 10088-3 ; ASTM A182 max. 0,05 max. 0,70 max. 1,50 max. 0,040 max. 0,15 12,0-14,0 3,5-4,5 0,30-0,70 min. 0,020 acc. to EN 10088-3 Chemical industry ; Energy technology 7,70 0,60 25,0 20-100 °C: 10,5 / 20-400 °C: 11,6 hardened and tempered 900-1100
detail 1.4362 X2CrNiN23-4 2304
F68
S32304
AFNOR Z3CN23-04AZ; SIS 3227 Corrosion-resistant lean duplex steel for the offshore industry, mechanical engineering, for fasteners and chains EN 10088-3; EN 10272; ASTM A182; ASTM A276; ASTM A479; AD 2000 W2 + W10; NACE MR0175; ISO 15156-3; PED 97/23/EC; ASME SA182; ASME SA276; ASME SA479 max. 0,030 max. 1,00 max. 2,00 max. 0,035 max. 0,015 22,0-24,5 3,5-5,5 0,10-0,60 0,05-0,20 0,10-0,60 acc. to EN 10088-3 Automotive ; Aerospace ; Chemical industry ; Energy technology ; Hydrogen applications 7,80 0,80 15,0 20-100 °C: 13,0 / 20-200 °C: 13,5 / 20-300 °C: 14,0 solution annealed max. 260 600-830
detail 1.4404 X2CrNiMo17-12-2 316L
S31603
BS 316S11; AFNOR Z3CND17-12-02; JIS SUS316L; SS 2348; UNE F.3533 Corrosion-resistant austenitic steel for the chemical industry, food industry, automotive industry, mechanical engineering, construction industry, plant engineering, energy technology, medical technology and pharmacy EN 10088-3; EN 10272; ASTM A182; ASTM A276; ASTM A479; AD 2000 W2 + W10; EN 10269; AMS 5653; AMS QQS 763; NACE MR0175; ISO 15156-3; PED 97/23/EC; ASME SA182; ASME SA276; ASME SA479; ASTM F899; EN ISO 7153-1 max. 0,030 max. 1,00 max. 2,00 max. 0,045 max. 0,030 16,5-18,5 10,0-13,0 2,00-2,50 max. 0,10 acc. to EN 10088-3 Automotive ; Aerospace ; Chemical industry ; Defence ; Medical technology ; Hydrogen applications 8,00 0,75 15,0 20-100 °C: 16,0 / 20-400 °C: 17,5 / 20-500 °C: 18,0 solution annealed max. 215 500-700
detail 1.4410 X2CrNiMoN25-7-4 F53
S32750
AFNOR Z3CND25-06Az Corrosion-resistant super duplex steel with excellent corrosion resistance for use in seawater environments, e.g. for offshore power plants or seawater desalination plants EN 10088-3; EN 10272; ASTM A182; ASTM A276; ASTM A479; AD 2000 W2 + W10; NACE MR0175; ISO 15156-3; PED 97/23/EC; ASME SA182; ASME SA276; ASME SA479 max. 0,030 max. 1,00 max. 2,00 max. 0,035 max. 0,015 24,0-26,0 6,0-8,0 3,0-4,5 0,24-0,35 acc. to EN 10088-3 Automotive ; Aerospace ; Chemical industry ; Energy technology ; Hydrogen applications 7,80 0,80 14,2 solution annealed max. 290 730-930
detail 1.4418 X4CrNiMo16-5-1 S165M

AFNOR Z6CND16-05-01; SS 2387 Corrosion-resistant martensitic steel for the chemical industry, energy technology, the pump industry, mechanical and plant engineering, environmental technology, the aerospace industry and drive technology EN 10088-3; EN 10272 max. 0,06 max. 0,70 max. 1,50 max. 0,040 max. 0,030 15,0-17,0 4,0-6,0 0,80-1,50 min. 0,020 acc. to EN 10088-3 Automotive ; Aerospace ; Chemical industry ; Energy technology ; Hydrogen applications 7,70 0,80 15,0 20-100 °C: 10,3 / 20-400 °C: 11,6 hardened and tempered 900-1100
detail 1.4432 X2CrNiMo17-12-3 316L
S31603
BS 316S13; AFNOR Z3NrNiMo17-12-3; JIS SUS316L; Gost 06Ch17N13M3-WB; UNE F.3537 Corrosion-resistant austenitic steel for the chemical, food, automotive, mechanical engineering, construction, aerospace, and pulp and textile industries EN 10088-3; EN 10272; ASTM A182; ASTM A276; ASTM A479; AD 2000 W2 + W10; NACE MR0175; ISO 15156-3; PED 97/23/EC; ASME SA182; ASME SA276; ASME SA479 max. 0,030 max. 1,00 max. 2,00 max. 0,045 max. 0,030 16,5-18,5 10,5-13,0 2,50-3,00 max. 0,10 acc. to EN 10088-3 Automotive ; Aerospace ; Chemical industry ; Hydrogen applications 8,00 0,75 15,0 20-100 °C: 16,0 / 20-400 °C: 17,5 / 20-500 °C: 18,0 solution annealed max. 215 500-700
detail 1.4435 X2CrNiMo18-14-3 316L
S31603
BS 316S13; AFNOR Z3CND18-14-03; JIS SUS316L; SS 2353; Gost 03Ch17N14M3 Corrosion-resistant austenitic steel for the chemical industry, electronic equipment, semiconductor industry, medical technology, fittings and plant construction EN 10088-3; EN 10272; ASTM A182; ASTM A276; ASTM A479; AD 2000 W2 + W10; NACE MR0175; ISO 15156-3; PED 97/23/EC; ASME SA182; ASME SA276; ASME SA479 max. 0,030 max. 1,00 max. 2,00 max. 0,045 max. 0,030 17,0-19,0 12,5-15,0 2,50-3,00 max. 0,10 acc. to EN 10088-3 Chemical industry ; Medical technology ; Hydrogen applications 8,00 0,75 15,0 20-100 °C: 16,0 / 20-400 °C: 17,5 / 20-500 °C: 18,0 solution annealed max. 215 500-700
detail 1.4441 X2CrNiMo18-15-3 316LVM
F138
S31673
AFNOR X2CrNiMo18-15-3 Corrosion-resistant austenitic steel for medical technology and the manufacture of implants EN ISO 5832-1; ASTM F138 max. 0,030 max. 1,00 max. 2,00 max. 0,025 max. 0,010 17,0-19,0 13,0-15,0 2,25-3,00 max. 0,10 max. 0,50 acc. to EN ISO 5832-1 Chemical industry ; Medical technology ; Hydrogen applications 8,00 0,75 15,0 20-100 °C: 16,5 solution annealed 600-800
detail 1.4462 X2CrNiMoN22-5-3 318 LN
F51
S31803
BS 318S13; AFNOR Z3CND22-05Az; JIS SUS329 J3L; SS 2377 Corrosion-resistant duplex steel for the chemical industry, energy technology, food technology, machine and valve construction, environmental technology and the construction industry EN 10088-3; EN 10272; ASTM A182; ASME SA182; ASTM A276; ASME SA276; ASTM A479; ASME SA479; NACE MR0175; ISO 15156-3; PED 97/23/EC; AD 2000 W2 + W10 max. 0,030 max. 1,00 max. 2,00 max. 0,035 max. 0,015 21,0-23,0 4,5-6,5 2,50-3,50 0,10-0,22 max. 0,50 acc. to EN 10088-3 Aerospace ; Chemical industry ; Defence ; Hydrogen applications 7,80 0,80 15,0 20-100 °C: 13,0 / 20-200 °C: 13,5 / 20-300 °C: 14,0 solution annealed max. 270 650-880
detail 1.4472 X4CrNiMnMo21-9-4 F1586
S31675
M30NW Corrosion-resistant austenitic steel for implants, fittings and high-pressure technology EN ISO 5832-9; ASTM F1586; NF S94-090 max. 0,08 max. 0,75 2,00-4,25 max. 0,025 max. 0,010 19,5-22,0 9,0-11,0 2,0-3,0 0,25-0,50 max. 0,25 0,25-0,80 acc. to EN ISO 5832-9 Aerospace ; Chemical industry ; Medical technology ; Hydrogen applications 7,90 0,75 14,0 20-200 °C: 16,6 / 20-400 °C: 17,4 annealed min. 740
detail 1.4501 X2CrNiMoCuWN25-7-4 F53
S32750
AFNOR Z3CNDU25-06Az Corrosion-resistant super duplex steel with excellent corrosion resistance for use in seawater environments, e.g. for offshore applications EN 10088-3; EN 10272; ASTM A182; ASME SA182; ASTM A276; ASME SA276; ASTM A479; ASME SA479; NACE MR0175; ISO 15156-3; PED 97/23/EC; AD 2000 W2 + W10 max. 0,030 max. 1,00 max. 1,00 max. 0,035 max. 0,015 24,0-26,0 6,0-8,0 3,0-4,0 0,20-0,30 0,50-1,00 0,50-1,00 acc. to EN 10088-3 Aerospace ; Chemical industry ; Energy technology ; Hydrogen applications 7,80 0,80 15,0 20-100 °C: 13,3 / 20-400 °C: 14,2 solution annealed max. 290 730-930
detail 1.4529 X1NiCrMoCuN25-20-7 926
N08926
N08904
Cronifer 1925hMo Corrosion-resistant super austenite for onshore and offshore technology, the shipbuilding industry, medical technology, environmental technology, architecture and the pulp and textile industry EN 10088-3; VdTÜV Blatt 502; SEW 400; ASTM B649; ASTM A240; EN 10222-5; EN 10272; NACE MR0175; ISO 15156-3; PED 97/23/EC; AD 2000 W2 + W10 max. 0,020 max. 0,50 max. 1,00 max. 0,030 max. 0,010 19,0-21,0 24,0-26,0 6,00-7,0 0,15-0,25 0,50-1,50 acc. to EN 10088-3 Aerospace ; Chemical industry ; Medical technology ; Hydrogen applications 8,10 1,00 12,0 20-100 °C: 15,0 / 20-400 °C: 16,4 / 20-500 °C: 16,7 solution annealed 190-250 650-850
detail 1.4534 X3CrNiMoAl13-8-2 XM-13
S13800
13-8Mo Corrosion-resistant, hardenable martensitic steel for the aircraft and rocket industry, e.g. for high-strength screws, bolts, landing gear parts, pumps and valves in high-pressure systems AMS 5629; ASTM A564; WL 1.4534 max. 0,05 max. 0,10 max. 0,10 max. 0,010 max. 0,008 12,25-13,25 7,50-8,50 2,00-2,50 max. 0,010 0,90-1,35 acc. to AMS 5629 Automotive ; Aerospace ; Chemical industry ; Defence ; Medical technology ; Hydrogen applications 7,70 0,61 14,0 20-100 °C: 10,50 / 20-400 °C: 12,0 solution annealed max. 363
detail 1.4539 X1NiCrMoCu25-20-5 904
904L
N08904
AFNOR Z2NCDU25-20; SS 2562 Corrosion-resistant super duplex steel with excellent corrosion resistance for use in seawater environments, e.g. for offshore applications, the medical industry, shipbuilding and fertilizer production EN 10088-3; VdTÜV Blatt 421; NACE MR0175; ISO 15156-3; ASTM A240; EN 10272; AD 2000 W2 + W10; PED/97/23/EC max. 0,020 max. 0,70 max. 2,00 max. 0,030 max. 0,010 19,0-21,0 24,0-26,0 4,0-5,0 max. 0,15 1,20-2,00 acc. to EN 10088-3 Chemical industry ; Medical technology ; Hydrogen applications 8,00 0,85 14,0 20-100 °C: 17,50 / 20-400 °C: 18,5 /20-500 °C: 18,5 solution annealed max. 250 580-800
detail 1.4541 X6CrNiTi18-10 321
S32100
BS 321S31; BS 321S51; AFNOR Z6CNT18-10; SS 2337; JIS SUS321 Corrosion resistant titanium stabilized austenitic steel for the automotive, construction, chemical, food, engineering, nuclear, and pulp and paper industries EN 10088-3; EN 10272; ASTM A182; ASTM A276; ASTM A479; AD 2000 W2 + W10; NACE MR0175; ISO 15156-3; PED 97/23/EC; ASME SA182; ASME SA276; ASME SA479 max. 0,08 max. 1,00 max. 2,00 max. 0,045 max. 0,030 17,0-19,0 9,0-12,0 5xC - 0,70 acc. to EN 10088-3 Automotive ; Aerospace ; Chemical industry ; Defence ; Medical technology ; Hydrogen applications 7,90 0,73 15,0 20-100 °C: 16,0 / 20-400 °C: 17,5 / 20-500 °C: 18,0 solution annealed max. 215 500-700
detail 1.4542 X5CrNiCuNb16-4 630
S17400
17-4PH®; AFNOR X5CrNiCuNb16-4; JIS SUS630 Corrosion resistant heat treatable martensitic steel for mechanical engineering, medical technology, power engineering, electronics industry, injection components, general aviation industry, food industry and chemical industry EN 10088-3; ASTM A564; AMS 5643; ASTM F899; EN ISO 7153-1 max. 0,07 max. 0,70 max. 1,50 max. 0,040 max. 0,030 15,0-17,0 3,0-5,0 max. 0,60 3,0-5,0 5xC -0,45 acc. to EN 10088-3 Automotive ; Aerospace ; Chemical industry ; Energy technology ; Defence ; Medical technology 7,80 0,71 16,0 20-100 °C: 10,9 / 20-300 °C: 11,1 solution annealed max. 360 ≈ 1100
detail 1.4545 X5CrNiCuNb15-5-4 XM-12
S15500
15-5PH® Corrosion resistant heat treatable martensitic steel for the aerospace, medical, petroleum, and sports and leisure industries WL 1.4545; ASTM A564; AMS 5659 max. 0,07 max. 1,00 max. 1,00 max. 0,030 max. 0,015 14,0-15,5 3,50-5,50 max. 0,50 2,50-4,50 5xC - 0,45 acc. to AMS 5659 Automotive ; Aerospace ; Chemical industry ; Energy technology ; Defence ; Medical technology 7,80 0,77 16,0 20-100 °C: 10,8 solution annealed max. 360 ≈ 1100
detail 1.4548 X5CrNiCuNb17-4-4 630
S17400
17-4PH®; AFNOR X5CrNiCuNb17-4-4; JIS SUS630 Corrosion-resistant hardenable martensitic steel for the aerospace industry, rocket construction, mechanical engineering, energy technology and measurement and control technology WL 1.4548; ASTM A564; AMS 5622; ASTM F899; EN ISO 7153-1; AMS 5643 max. 0,07 max. 1,00 max. 1,00 max. 0,025 max. 0,015 15,0-17,5 3,00-5,00 max. 0,50 3,0-5,0 5xC - 0,45 acc. to AMS 5622 Automotive ; Aerospace ; Chemical industry ; Energy technology ; Defence ; Medical technology 7,80 0,71 16,0 20-100 °C: 10,9 / 20-200 °C: 11,1 solution annealed max. 360 ≈ 1100
detail 1.4550 X6CrNiNb18-10 347
347H
S34700
SS 2338; F347 Corrosion-resistant austenitic steel for plant construction, apparatus construction, mechanical engineering, power plant construction, energy technology and the nuclear industry EN 10088-3; EN 10272; ASTM A276; ASME SA276; ASTM A479; ASME SA479; ASTM A182; ASME SA182; AD 2000 W2 + W10; PED 97/23/EC max. 0,08 max. 1,00 max. 2,00 max. 0,045 max. 0,015 17,0-19,0 9,0-12,0 10xC - 1,00 acc. to EN 10088-3 Aerospace ; Chemical industry 7,90 0,73 15,0 20-100 °C: 16,0 / 20-400 °C: 17,5 / 20-500 °C: 18,0 solution annealed max. 215 500-700
detail 1.4568 X7CrNiAl17-7 631
S17700
17-7PH® Corrosion-resistant semi-austenitic steel for the automotive industry, springs, thrust washers, bearings and medical technology EN 10088-3; AMS 5644; ASTM A564; ASTM F899 max. 0,09 max. 0,70 max. 1,00 max. 0,040 max. 0,015 16,0-18,0 6,5-7,8 0,70-1,50 acc. to EN 10088-3 Aerospace ; Defence 7,90 0,80 15,0 20-100 °C: 15,5 / 20-400 °C: 17,5 solution annealed 700-850
detail 1.4571 X6CrNiMoTi17-12-2 316Ti
S31635
BS 320S18; BS 320S31; AFNOR Z6CNDT17-12; JIS SUS316Ti; Gost 10Ch17N13M2T; UNE F.3535; SS 2350 Corrosion-resistant titanium-stabilized austenitic steel for the construction industry, apparatus and pipeline construction, the chemical industry, the food industry, mechanical engineering, the medical and pharmaceutical industry and shipbuilding EN 10088-3; EN 10272; ASTM A182; ASTM A276; ASTM A479; AD 2000 W2 + W10; NACE MR0175; ISO 15156-3; PED 97/23/EC; ASME SA182; ASME SA276; ASME SA479 max. 0,08 max. 1,00 max. 2,00 max. 0,045 max. 0,030 16,5-18,5 10,5-13,5 2,00-2,50 5xC - 0,70 acc. to EN 10088-3 Automotive ; Aerospace ; Chemical industry ; Defence ; Medical technology ; Hydrogen applications 8,00 0,75 15,0 20-100 °C: 16,5 / 20-400 °C: 18,5 / 20-500 °C: 19,0 solution annealed max. 215 500-700
detail 1.4597 X8CrMnCuNB17-8-3 204Cu
S20430
SS 204Cu Corrosion-resistant austenitic steel for the food industry EN 10088-3 max. 0,10 max. 2,00 6,5-9,0 max. 0,040 max. 0,030 15,0-18,0 max. 3,00 max. 1,00 0,10-0,30 2,00-3,5 acc. to EN 10088-3 Chemical industry 7,80 solution annealed max. 245 560-780
detail 1.4713 X10CrAlSi7

Corrosion-resistant ferritic steel for furnace construction, apparatus construction, the automotive industry and the cement chain industry EN 10095 max. 0,12 0,50-1,00 max. 1,00 max. 0,040 max. 0,015 6,00-8,00 0,50-1,00 acc. to EN 10095 Automotive ; Chemical industry 7,70 0,69 23,0 20-200 °C: 11,5 / 20-400 °C: 12,0 / 20-600 °C: 12,5 annealed max. 184 ≈ 620
detail 1.4742 X10CrAlSi18 442
S44200
AFNOR Z12CAS18 Corrosion and heat-resistant ferritic steel for chemical apparatus construction, the pulp industry and the food industry EN 10095; SEW 470 max. 0,12 0,70-1,40 max. 1,00 max. 0,040 max. 0,015 17,0-19,0 0,70-1,20 acc. to EN 10095 Chemical industry 7,70 0,93 19,0 20-200 °C: 10,5 / 20-400 °C: 11,5 / 20-600 °C: 12,0 / 20-1000 °C: 13,5 annealed max. 207 ≈ 700
detail 1.4762 X10CrAlSi25 446
S44600
AFNOR Z10CAS24 Corrosion and heat-resistant ferritic steel for chemical apparatus construction, steam boilers, machine and power plant construction EN 10095; SEW 470; ASTM A276; ASME SA276 max. 0,12 0,70-1,40 max. 1,00 max. 0,040 max. 0,015 23,0-26,0 1,20-1,70 acc. to EN 10095 Chemical industry ; Energy technology 8,00 1,10 17,0 annealed max. 214 ≈ 720
detail 1.4828 X15CrNiSi20-12 309
S30900
BS 309S24; AFNOR Z17CNS20-12; JIS SUH309 Corrosion and heat-resistant austenitic steel for high-temperature applications, mechanical engineering, furnace construction, the chain industry, apparatus construction and the automotive industry EN 10095; SEW 470 max. 0,20 1,50-2,50 max. 2,00 max. 0,045 max. 0,015 19,0-21,0 11,0-13,0 max. 0,11 acc. to EN 10095 Chemical industry 7,90 0,87 15,0 20-200 °C: 16,5 / 20-600 °C: 18,0 / 20-1000 °C: 20,0 solution annealed max. 222 ≈ 750
detail 1.4841 X15CrNiSi25-21 314
S31400
BS 314S25; AFNOR Z15CNS25-20; JIS SUH310 Corrosion and heat-resistant austenitic steel for high-temperature applications, mechanical engineering, furnace construction, the chemical industry, apparatus construction and the automotive industry EN 10095; SEW 470 max. 0,20 1,50-2,50 max. 2,00 max. 0,045 max. 0,015 24,0-26,0 19,0-22,0 max. 0,11 acc. to EN 10095 Chemical industry 7,90 0,90 15,0 20-200 °C: 15,5 / 20-400 °C: 17,0 / 20-600 °C: 17,5 / 20-1000 °C: 19,0 solution annealed max. 238 ≈ 800
detail 1.4845 X8CrNi25-21 310S
S31008
AFNOR 28CN25-20; SS 2361 Corrosion and heat resistant austenitic steel for high temperature applications such as furnace hooks, charging baskets, exhaust systems, heating elements, nuts and bolts and heat resistant chains EN 10095; SEW 470 max. 0,10 max. 1,50 max. 2,00 max. 0,045 max. 0,015 24,0-26,0 19,0-22,0 max. 0,11 acc. to EN 10095 Chemical industry 7,90 0,85 15,0 20-200 °C: 15,5 / 20-400 °C: 17,0 / 20-600 °C: 17,5 / 20-1000 °C: 19,0 solution annealed max. 222 ≈ 750
detail 1.4878 X8CrNiTi18-10 321H
S32109
Gost 08x18H10T Corrosion-resistant, titanium-stabilized and heat-resistant austenitic steel for furnace and apparatus construction EN 10095; SEW 470; ASTM A182; ASTM A276; ASTM A479; ASME SA182; ASME SA276; ASME SA479 max. 0,10 max. 1,00 max. 2,00 max. 0,045 max. 0,015 17,0-19,0 9,0-12,0 5x - 0,80 acc. to EN 10095 Chemical industry 7,90 0,73 15,0 20-200 °C: 17,0 / 20-400 °C: 18,0 / 20-600 °C: 18,6 / 20-800 °C: 19,1 solution annealed max. 192 500-750
detail 1.4903 X10CrMoVNb9-1 F91
K90901
Corrosion-resistant, heat-resistant martensitic steel for pressure-retaining steam turbine components EN 10302; ASTM A182; ASME SA182 0,08-0,12 max. 0,50 0,30-0,60 max. 0,025 max. 0,015 8,0-9,5 max. 0,40 0,85-1,05 0,18-0,25 0,030-0,070 max. 0,030 0,060-0,10 acc. to EN 10302 Chemical industry ; Energy technology 7,70 0,50 26,0 20-100 °C: 10,7 / 20-400 °C: 11,9 / 20-500 °C: 12,3 hardened and tempered 200-248 620-850
detail 1.4913 X19CrMoVNbN11-1

AFNOR Z20CDNBV11 Corrosion resistant high temperature martensitic steel for power engineering, turbine blades, bolts and nuts EN 10269; EN 10302 0,17-0,23 max. 0,50 0,40-0,90 max. 0,025 max. 0,015 10,0-11,5 0,20-0,60 0,50-0,80 0,10-0,30 0,05-0,10 max. 0,020 0,25-0,55 max. 0,0015 acc. to EN 10269 Energy technology 7,70 24,0 20-100 °C: 10,5 / 20-600 °C: 12,5 solution annealed 900-1050
detail 1.4923 X29CrMoV12-1

Corrosion-resistant high-temperature martensitic steel for power engineering, turbine blades, turbine runners, fasteners, high-temperature springs and superheated steam valves EN 10269; EN 10302 0,18-0,24 max. 0,50 0,40-0,90 max. 0,025 max. 0,015 11,0-12,5 0,30-0,80 0,80-1,20 0,25-0,35 acc. to EN 10269 Aerospace ; Energy technology 7,70 0,60 29,0 20-100 °C: 10,5 / 20-600 °C: 12,5 solution annealed max. 270 800-950
detail 1.4938 X12CrNiMoV12-3
S64152
Jethete Corrosion-resistant, high-temperature martensitic steel for power engineering, e.g. for highly stressed screws in turbine construction EN 10269; EN 10302; AMS 5719 0,08-0,15 max. 0,50 0,40-0,90 max. 0,025 max. 0,015 11,0-12,5 2,00-3,00 1,50-2,00 0,25-0,40 0,020-0,040 acc. to EN 10269 Aerospace ; Energy technology 7,70 14,0 hardened and tempered max. 311 930-1130
detail 1.4939 X12CrNiMo12 XM-32
S64152
Jethete Corrosion-resistant, high-temperature martensitic steel for the aerospace industry, e.g. for engine compressor parts, discs, blades, screws, bolts and housing parts for temperatures up to 500 °C WL 1.4939; AMS 5719 0,08-0,15 max. 0,35 max. 0,90 max. 0,025 max. 0,025 11,00-12,50 2,00-3,00 1,50-2,00 0,25-0,40 0,01-0,05 max. 0,50 acc. to AMS 5719 Aerospace ; Energy technology 7,70 42,0 hardened and tempered max. 311
detail 1.4980 X6NiCrTiMoVB25-15-5 660
S66286
Alloy A-286 Corrosion-resistant precipitation-hardenable steel for gas turbine and engine parts, e.g. rotors, discs, shafts, bolts, screws, spacers, fittings, casings EN 10269; EN 10302; VdTÜV material sheet 435; ASTM A453 0,03-0,08 max. 1,00 1,00-2,00 max. 0,025 max. 0,015 13,5-16,0 24,0-27,0 1,00-1,50 0,10-0,50 max. 0,35 1,90-2,30 0,003-0,010 acc. to EN 10269 Automotive ; Aerospace ; Chemical industry ; Energy technology 7,95 0,91 12,0 20-100 °C: 16,5 / 20-400 °C: 17,4 / 20-500 °C: 17,6 / 20-800 °C: 18,5 precipitation hardened 900-1150
detail 2.4360 NiCu30Fe B164
N04400
BS NA13; AFNOR Nu30; Alloy 400 Nickel-copper alloy for offshore technology, shipbuilding, plants in the chemical and petrochemical industry, environmental and waste water technology DIN 17744; DIN 17752; ASTM B164; VdTÜV material sheet 263; ASTM B164; ASME SB-164; NACE MR0175 max. 0,30 max. 0,50 max. 2,00 max. 0,024 min. 63,0 28,0-34,0 max. 2,5 acc. to ASTM B164 Aerospace ; Chemical industry 8,80 0,51 26,0 20-100 °C: 13,9 / 20-400 °C: 16,0 / 20-500 °C: 16,3 soft annealed max. 150 min. 450
detail 2.4602 NiCr21Mo14W
N06022
Alloy 22 Nickel-chromium-molybdenum-tungsten alloy for use in flue gas desulfurization plants, the chemical industry, environmental protection plants, waste incineration plants and waste water plants DIN 17744; DIN 17752; VdTÜV material sheet 479; ASTM B564; ASME SB-564; ASTM B574; ASME SB-574; NACE MR0175 max. 0,015 max. 0,08 max. 0,50 max. 0,020 max. 0,02 20,0-22,5 Rest 12,5-14,5 max. 0,35 max. 2,5 2,5-3,5 2,0-6,0 acc. to ASTM B574 Chemical industry 8,70 1,14 10,1 20-100 °C: 11,1 / 20-400 °C: 17,5 / 20-500 °C: 19,5 solution annealed max. 240 690-950
detail 2.4605 NiCr23Mo16Al
N06059
Alloy 59 Nickel-chromium-molybdenum alloy with particularly low levels of carbon and silicon for chemical plants, the pharmaceutical industry, scrubbers, heat exchangers, flue gas desulphurization components, marine diesel engines, seawater components, reactors and sulfuric acid coolers DIN 17744; DIN 17752; VdTÜV material sheet 505; ASTM B564; ASME SB-564; ASTM B574; ASME SB-574; NACE MR0175 max. 0,010 max. 0,10 max. 0,50 max. 0,015 max. 0,010 22,0-24,0 Rest 15,0-16,5 max. 0,50 0,1-0,4 max. 0,3 max. 1,5 acc. to ASTM B574 Chemical industry 8,60 1,26 10,4 20-100 °C: 12,1 / 20-400 °C: 17,0 / 20-500 °C: 18,6 solution annealed min. 690
detail 2.4608 NiCr26MoW
N06333
Alloy 333 Nickel-chromium-iron alloy with additions of molybdenum and cobalt. Tungsten and silicon with excellent resistance to oxidation and high temperature strength above 1000°C for use in combustors, gas turbine casings and petrochemical plants DIN 17744; DIN 17752; EN 10302 0,03-0,08 0,70-1,50 max. 2,00 max. 0,030 max. 0,015 24,0-26,0 44,0-47,0 2,5-4,0 2,5-4,0 2,5-4,0 Rest acc. to DIN 17744 Chemical industry ; Energy technology 8,20 1,14 11,1 solution annealed min. 550
detail 2.4610 NiMo16Cr16Ti
N06455
Alloy C-4 Nickel-molybdenum-chromium alloy with high precipitation resistance and therefore excellent corrosion resistance. The material is ideal for use in chemical process technology DIN 17744; DIN 17752; AMS 5772 max. 0,015 max. 0,08 max. 1,00 max. 0,025 max. 0,015 14,0-18,0 Rest 14,0-17,0 max. 0,50 max. 2,0 max. 0,70 max. 3,0 acc. to DIN 17744 Aerospace ; Chemical industry 8,60 1,24 10,1 soft annealed 700-900
detail 2.4660 NiCr20CuMo
N08020
Alloy 20 Nickel-iron-chromium alloy with additions of molybdenum and copper for phosphoric and sulfuric acid plants DIN 17744; DIN 17752; ASTN B436; ASME SB-473 max. 0,07 max. 1,00 max. 2,00 max. 0,045 max. 0,035 19,0-21,0 32,0-38,0 2,0-3,0 3,0-4,0 8xC - 1,00 Rest acc. to ASTM B473 Chemical industry 8,10 1,07 11,5 20-100 °C: 15,0 / 20-400 °C: 16,4 / 20-500 °C: 16,7 stabilized min. 550
detail 2.4665 NiCr19Fe19Nb5Mo3
N06002
Alloy HX Nickel-chromium-iron-molybdenum alloy for use in gas turbines and industrial furnaces DIN 17744; DIN 17752; AMS 5754; EN 10302; NACE MR0175 0,05-0,15 max. 1,00 max. 1,00 max. 0,020 max. 0,015 20,5-23,0 Rest 8,0-10,0 max. 0,50 max. 0,5 0,50-2,5 0,20-1,00 max. 0,010 17,0-20,0 acc. to DIN 17744 Aerospace ; Chemical industry ; Energy technology 8,22 1,15 9,1 20-100 °C: 13,6 / 20-500 °C: 14,9 solution annealed max. 241
detail 2.4668 NiCr19Nb5Mo3
N07718
Alloy 718; AFNOR NC19DeNb Nickel-chromium-iron-molybdenum alloy for use in turbine construction, aerospace and oil and gas applications DIN 17744; DIN 17752; ASTM B637; ASME SB-637; AMS 5662; AMS 5663; AMS 5664; EN 10269; EN 10302 max. 0,08 max. 0,35 max. 0,35 max. 0,015 max. 0,015 17,0-21,0 50,0-55,0 2,80-3,30 max. 0,30 020-0,80 max. 1,00 4,75-5,50 0,65-1,15 max. 0,006 Rest acc. to ASTM B637 Aerospace ; Chemical industry ; Energy technology 8,20 1,23 13,0 20-100 °C: 14,1 solution annealed min. 1230
detail 2.4669 NiCr15Fe7TiAl
N07750
Alloy X750 Nickel-chromium-iron alloy for components in gas turbines ASTM B637; ASME SB-637; AMS 5667; AMS 5668; AMS 5669; AMS 5670; AMS 5671; EN 10269; EN 10302 max. 0,08 max. 0,50 max. 1,00 max. 0,010 14,0-17,0 min. 70,0 max. 0,50 0,40-1,00 max. 1,00 0,70-1,20 2,25-2,75 5,0-9,0 acc. to ASTM B637 Aerospace ; Chemical industry ; Energy technology 8,20 1,21 12,0 20-100 °C: 12,6 solution annealed min. 262 min. 980
detail 2.4816 NiCr15Fe7TiAl
N06600
Alloy 600 Nickel-chromium-iron alloy for industrial furnace construction, the chemical industry and reactor construction ASTM B166; ASME SB-166; SEW 470; DIN 17742; EN 10095 max. 0,015 max. 0,50 max. 1,00 max. 0,015 14,0-17,0 min. 72,0 max. 0,50 6,0-10,0 acc. to ASTM B166 Aerospace ; Chemical industry ; Energy technology 8,50 0,98 14,8 20-100 °C: 13,2 / 20-400 °C: 14,4 / 20-500 °C: 14,8 solution annealed 490-640
detail 2.4819 NiMo16Cr15Fe6W4
N10276
AFNOR NC17D; Alloy C-276 Nickel-chromium-molybdenum alloy with tungsten for the chemical and petrochemical industries, for components in organic processes containing chlorides and for catalysts DIN 17744; DIN 17752; VdTÜV - material sheet 400; ASTM B564; ASME SB-564; ASTM B574; ASME SB-574; NACE MR0175 max. 0,010 max. 0,08 max. 1,00 max. 0,04 max. 0,03 14,5-16,5 15,0-17,0 max. 0,35 max. 2,5 3,0-4,5 4,0-7,0 acc. to ASTM B574 Aerospace ; Chemical industry 8,60 1,26 10,4 20-100 °C: 11,7 / 20-500 °C: 13,5 solution annealed min. 750
detail 2.4856 NiCr22Mo9Nb
N06625
AFNOR NC22DNb; Alloy 625 Nickel-chromium-molybdenum-niobium alloy for use in pressure vessels, the oil and gas industry, the chemical process industry, marine engineering and environmental engineering DIN 17744; DIN 17752; EN 10095; ASTM B446; ASME SB-446; AMS 5666; VdTÜV - material sheet 499 max. 0,10 max. 0,50 max. 0,50 max. 0,015 max. 0,015 20,0-23,0 min. 58,0 8,0-10,0 max. 0,40 max. 1,0 3,15-4,15 max. 0,40 max. 5,0 acc. to ASTM B446 Chemical industry 8,50 1,29 10,0 20-100 °C: 12,8 / 20-400 °C: 13,7 / 20-500 °C: 14,1 solution annealed max. 240 820-1050
detail 2.4858 NiFe30Cr21Mo3
N08825
AFNOR NC21FeDU; Alloy 825 Nickel-iron-chromium alloy with additions of copper and molybdenum for the oil and gas industry, the chemical industry and the food industry DIN 17744; DIN 17752; ASTM B425; ASME SB-425; VdTÜV material sheet 432; NACE MR0175 max. 0,05 max. 0,50 max. 1,00 max. 0,03 19,5-23,5 38,0-46,0 2,5-3,5 1,5-3,0 max. 0,2 0,6-1,2 min. 22,0 acc. to ASTM B425 Chemical industry ; Energy technology 8,10 1,12 10,8 20-100 °C:14,1 / 20-400 °C: 15,6 / 20-500 °C: 15,8 / 20-1000 °C: 17,9 annealed min. 586
detail 2.4952 NiCr20TiAl
N07080
AFNOR NC 20 TA; Alloy 80A Nickel-chromium alloy for gas turbine components such as blades, rings and disks, as well as components for fasteners, exhaust valves and high temperature springs EN 10269; EN 10090; ASTM B637; ASME SB-637; DIN 17742 0,04-0,10 max. 1,00 max. 1,00 max. 0,020 max. 0,015 18,0-21,0 min. 65,0 max. 0,20 1,00-1,80 max. 1,0 1,80-2,70 max. 0,008 max. 1,50 acc. to EN 10269 Aerospace ; Chemical industry ; Energy technology 8,20 1,15 13,0 20-100 °C: 12,7 / 20-400 °C: 14,1 / 20-500 °C: 14,4 / 20-1000 °C: 18,1 precipitation hardened 1000-1300
detail 2.4663 NiCr23Co12Mo
N06617
Alloy 617 Nickel-chromium-cobalt-molybdenum alloy for gas turbines, combustors, air heaters, furnace parts and radiant tubes, high-temperature heat exchangers, gas-cooled high-temperature reactors, components for plants in the chemical process industry and the petrochemical industry DIN 17744; DIN 17752; EN 10302; DIN 17744; VdTÜV material sheet 485; ASTM B166; ASME SB-166; AMS 5887 0,05-0,10 max. 0,20 max. 0,20 max. 0,010 max. 0,010 20,0-23,0 Rest 8,5-10,0 max. 0,50 0,70-1,40 11,0-14,0 0,20-0,60 max. 0,006 max. 2,00 acc. to EN 10302 Chemical industry ; Energy technology 8,40 1,22 13,4 20-200 °C: 12,6 / 20-400 °C: 13,6 / 20-600 °C: 14,0 solution annealed min. 690
detail 3.7025 Titan Grade 1
R50250
Pure titanium with up to 99.8% titanium for chemical and petrochemical apparatus construction, medical technology, motor sports, electroplating and the outdoor area ASTM B348; ASME SB-348; ASTM F67; ISO 5832-2 max. 0,08 max. 0,03 Rest max. 0,20 max. 0,18 max. 0,015 acc. to ASTM B348 Aerospace ; Chemical industry ; Energy technology ; Medical technology 4,51 0,47 21,0 annealed max. 120 min. 170
detail 3.7035 Titan Grade 2
R50400
Pure titanium for the chemical process industry, the offshore industry, aircraft construction, for heat exchangers and cryogenic vessels ASTM B348; ASME SB-348; ASTM F67; ISO 5832-2 max. 0,08 max. 0,03 Rest max. 0,30 max. 0,25 max. 0,015 acc. to ASTM B348 Aerospace ; Chemical industry ; Energy technology ; Medical technology 4,51 0,48 20,0 0-100 °C: 8,6 / 20-600 °C: 9,4 annealed max. 150 min. 345
detail 3.7144 Ti6Al2Sn4Zr2Mo
R54620
Ti6-2-4-2 Aerospace grade alpha/beta titanium alloy AMS 4975; WL 3.7144 max. 0,05 0,06-0,10 1,80-2,20 max. 0,05 5,50-6,50 Rest max. 0,10 max. 0,15 max. 0,0125 max. 0,005 1,80-2,20 3,60-4,40 acc. to AMS 4975 Aerospace 4,48 solution annealed min. 920
detail 3.7164 Ti6Al4V
R56400
Grade 5 Alpha/Beta titanium alloy for aerospace and medical applications AMS 4928; ISO 5832-3; ASTM B348; ASME SB-348 max. 0,08 3,50-4,50 max. 0,05 5,50-6,75 Rest max. 0,30 max. 0,20 max. 0,0125 max. 0,005 acc. to AMS 4928 Automotive ; Aerospace ; Chemical industry ; Medical technology 4,43 1,71 7,1 20-100 °C: 8,6 / 20-425 °C: 9,4 / 20-540 °C: 9,5 annealed min. 895
detail 3.7165 Ti6Al4V
R56400
Grade 5 Alpha/Beta titanium alloy for industrial applications AMS 4928; ISO 5832-3; ASTM B348; ASME SB-348 max. 0,08 3,50-4,50 max. 0,05 5,50-6,75 Rest max. 0,30 max. 0,20 max. 0,0125 max. 0,005 acc. to AMS 4928 Automotive ; Aerospace ; Chemical industry ; Medical technology 4,43 1,71 7,1 20-100 °C: 8,6 / 20-425 °C: 9,4 / 20-540 °C: 9,5 annealed min. 895
detail 3.7165.1 Ti6Al4V ELI
R56401
Grade 23 Alpha/Beta titanium alloy for aerospace and medical applications ASTM F136; ISO 5832-3 max. 0,08 3,50-4,50 max. 0,05 5,50-6,50 Rest max. 0,25 max. 0,13 max. 0,012 acc. to ASTM F136 Automotive ; Aerospace ; Chemical industry ; Medical technology 4,43 1,71 7,1 20-100 °C: 8,6 / 20-425 °C: 9,4 / 20-540 °C: 9,5 annealed min. 895
detail 1.8519 31CrMoV9

KHD; F.1721; 33H3MF CrMoV-alloyed nitration steel e.g. for spindles, screw conveyors, control parts, bolts and crankshafts EN 10085 0,27-0,34 max. 0,40 0,40-0,70 max. 0,025 max. 0,035 2,30-2,70 0,15-0,25 0,10-0,20 gem. EN 10085 7,73 0,19 43,0 20-100 °C:12,1 / 20-400 °C: 13,6 geglüht max. 248 ≈ 750